Workplace Hazard Eliminated
DuraGrip Slip Resistant System Eliminated Workplace Hazard
A large biosolids processing facility in southwest Florida tried several different types of slip resistant systems over the years, which all failed. This facility uses tremendous amounts of water in their process along with water soluble polymers.
The polymers are spray-applied using an atomizing spray nozzle. The mist from the spray drifts and settles on the surrounding nearby steps and floors, which caused extremely slippery conditions. Preventing a hazardous work environment is a top priority for the facility managers.
In-house personnel, along with the technical support and guidance from the local ENECON Field Engineering Specialist, used an ENECON slip resistant DuraGrip system to complete this project.
The floor and step areas were roughened and a degreaser was used. All existing polymer spray residue was removed and the floor was taped off to create the desired lines for the high traffic slip resistant area.
CHEMCLAD GP in haze gray and safety yellow were used with a 60 grit aggregate. After the tape was removed, a leaf blower was used to remove the excess, unused aggregate.
Management was so happy with the customer service and products used in this application that they already decided to use the same system in several other locations, including future plant upgrades.
